In motorsport’s evolution in Australia, the category known as Supercars, formerly known as V8 Supercars Australia, has opened the door to cars not of a four door body shape. With the success of the Ford Mustang in a retail sense, it makes sense to have the “tudor” as the first to be built under the new guidelines.
But first, some history. The Gen 2 design regs mandates a common chassis for any team entering the category. Builders are open but have to build a chassis and cage to the pre-determined specifications. It’s this bit that has caused some consternation and raised eyebrows, as the end result may have a car not of the same physical dimensions as the one it’s based on.
The V8 engine is located 100mm further back and down to the preceding chassis style, for weight balance and safety. Wheels must be 18 inches in diameter and thanks to the upward change it means bigger brakes can be fitted. The drivetrain is a transaxle, meaning the drive axles and gearbox are in one case.
For extra safety the fuel cell has been moved forward and the windscreen is now of a polycarbonate build, which is 250 times as strong as glass. Specific to Gen 2 also is being rear drive, right hand side drivers’ seat, four seats, and based on a car available to the public, meaning it must reflect the look of the car accurately.
What this means for the Ford Mustang Supercar is proven strength and reliability. It also means that thanks to the common chassis and cage, only a slight rejig of the Mustang’s familiar profile has been required.
There will be a little piece of history when the car makes its debut in 2019. Chassis DJRTP 02 or Dick Johnson Racing Team Penske 02, which was used for Supercars’ tyre and aerodynamic testing last year, will become one of the first Mustang Supercars. It will be used for testing and is set to be the team’s spare race car. DJRTP will build one brand new car and convert another.
It is currently the team’s second spare, last raced as a Falcon FG X in Fabian Coulthard’s hands during 2016. Work began on converting the chassis in mid 2018. Tickford Racing will also build a pair of new cars and convert two cars to the new body style.
Anticipation from teams was seen in 2017, with Cameron Waters driving a car whose chassis was earmarked to be a Mustang. After a point in time had been reached where the signoff was past to have a Mustang run in 2018, the car was built as a Falcon. The chassis’ build commenced in March of 2017, such was the timeline teams were hoping for in order to see the Mustang body run on Australian circuits this year.
Specialist graphic design outlet ssMedia, headed by Scott Yorston, has produced 3D visuals of many V8 Supercars and the current Supercar designs. Working from concept drawings and with a livery idea from the US, Scott has also produced his view of the Mustang Supercar which has been greeted with acclaim in the Australian motorsport fraternity. It shows, as much as Scott is able to produce due to legalities, a car very close to the road going version. With panels placed around the control chassis it appears a little taller in height and perhaps a little shorter than the road goer as a result.
Testing of the 2019 Mustang Supercar is underway, and we can’t wait to see it hit the track in anger! Are you looking forward to having the Mustang back on the grid of Australian race tracks? Let us know in the comments section below this article on our Facebook page!