Keeping you up to date with all things Rare Spares.

Rare Spares

Rare Spares Blog

  • Join Us on Facebook!
  • Visit Us on YouTube!
  • Follow Us on Instagram!
  • Subcribe to Our RSS Feed

The Falcon 300+ Prototype

Cars were simple once. Four doors, two doors, five doors in a wagon, three in a panel van. Australia’s own motoring history is full of variations on the theme, particularly of the two door variety. Holden had the Monaros and Toranas, Mitsubshi the Starion, Toyota the Supra and Celica, Chrysler the mighty Valiant, and Ford? Ford had a “tudor” going back to the days of the XP Falcon, a beautifully proportioned and styled machine. Escorts and Cortinas bobbled in and out with two doors. There was the heavy hipped XA to XC coupes, and then….nada. And it stayed that way for some time, until a design proposal for an AU Falcon based coupe was put forward. Admittedly, the AU wasn’t the prettiest looking thing on the road, so a coupe? Inspiration, in a way, came from brothers Troy and Clayton Hillier, well known in street machine circles. Based in Tenterfield, the brothers had, without attention and fanfare, converted an AU sedan to a coupe. Once Ford had been made aware of the car by W.A. based Advanced Engine Components, (AEC), and Millard Design in Victoria. Along with the soft approval of Ford, the car was put together in a relatively short time. Showcased at the Melbourne Auto Show in 2001, the red and silver highlighted machine certainly grabbed plenty of attention. Power was courtesy of a supercharged 4.6L V8, said to produce 370kW and 660Nm (with varying figures for both, it must be said), thanks to the Sprintex huffer from AEC bolted on top. Gears came courtesy of a six speed Tremec manual, that, when spun up, would join with the engine to see a 0-100 kmh time of 4.6 seconds, a rapid time in anyone’s book. Having 245/35 ZR19 and 275/30 ZR19 tyres to steer and grip certainly helped. Stoppers were four and two potters from Brembo. But it was the styling that made this car, sadly a one off, stand out.  There was tacit support from Ford Australia, with the then head of Ford Motorsport, Howard Marsden, overseeing the build project. It was based on the TE50 sedan platform, and was given some serious massage work. Computer Aided Design, or CAD, was employed. A redesign of the rear bulkhead and floorplan was undertaken to reduce weight and increase torsional strength. The rear guards were given a push outwards, but the main ingredient was the rearward movement of the B pillar by 200 mm. Naturally this meant the doors had to be lengthened and strengthened to suit. In order to overcome what is called a “crown effect”, and working with an already bulbous roofline (which would be flatted substantially for the BA Falcon), visual and physical design cues were employed. The roof was flattened substantially, however a lower profile rear wing was fitted to assist in making the car, especially from the rear, look lower. Twin headlights were fitted inside the triangular housings up front. The bonnet was massaged to provide clearance for the Sprintex supercharger. Bodywork here was a change to a simple looking air intake and the ground scraping chin on the bumper. Inside, the trim was lifted by fitting leather clad seats with red and grey trim. The driver binnacle was upgraded by using the Fairmont dash, however the overall dash design, complete with its soft organic curves, was untouched in real terms. The build itself was effectively a joint venture between the three companies and relied on Ford to see the project through for a viable sales base. Allegedly there were fifteen orders for the car, and at a price of around $100,000, that was a substantial investment. However, without the deeper pockets of Ford being available when they withdrew their support, the Falcon 300+ would remain an orphan, and a blip in Australia’s “tudor” history. What has been your favourite Australian made prototype? Head over to the Rare Spares Facebook page and let us know in the comments section below this article.