Keeping you up to date with all things Rare Spares.

Rare Spares

Rare Spares Blog

  • Join Us on Facebook!
  • Visit Us on YouTube!
  • Follow Us on Instagram!
  • Subcribe to Our RSS Feed

History of the LS Engine

There’s a saying in the automotive world: “There’s no replacement for displacement.” Somehow, that tag became attached to an engine, in a vee shape and packing eight cylinders, made by Chevrolet in America. In the late nineties General Motors and Chevrolet debuted a new V8. Dubbed “LS” for “Luxury Sport” it’s this name and engine that have popularized the above saying. First seen in the 1997 C5 Corvette, the all “aluminum” block, called the LS1, was also known as the small block Gen111. It replaced the LT or “Luxury Touring” engine that had been a mainstay for some time. It was what’s called a clean sheet design; essentially a start from nothing design, the only common points the LS had with the LT was bore spacing and conrod bearings. Even in the LS range of engines themselves items such as the bore centre, at 4.40 inches, cross bolted six bolt main bearing caps, and a four bolt per cylinder head bolt pattern are common. Alloy blocks are used for performance oriented vehicles whilst blocks made of iron are used for SUVs and trucks. At 5.7 litres or 350 cubic inches in capacity, as the most common iteration is seen in, it produced 257 kilowatts or 345 horsepower. Maximum torque was 470Nm or 350 pound-feet, found at 4400rpm. It was bolted into a substantial range of cars such as the Corvette, Firebird, and of course in Holden and HSV cars like the Statesman and Senator Signature. LS6 is the name given to a higher output but same capacity engine largely found in the C5 Corvette Z06, with production starting in 2001. Peak grunt was bumped to 287 kilowatts and torque to 522Nm initially, with further development lifting both to 302kW and 540Nm. There were also smaller engines based on the same architecture. Engineered for use in passenger SUV and trucks, the LS1 4.8L and 5.3L blocks have a 3.78 inch diameter for the bore. In 2005 GM unveiled the GenIV or LS2 engine. There were bigger capacities, cylinder deactivation technology for improved fuel savings, and variable valve timing. Capacity went to 6.0L (5964 cc in real terms) or 364 cubic inches. Base engines made 300kW and 542 Nm. Holden and HSV saw this installed in cars such as the Monaro and Grange. L76 is the designation given to the LS2s fitted with Active Fuel Management or AFM. It was some time before Holden chose to use the feature; from 2009 it was installed however only in cars with an automatic called the 6L80. Power was rated as 260kW and maximum twist of 510 Nm came in at 4400rpm. Designed to assist in bettering fuel economy by shutting down firing in four cylinders, the engine gave rise to the L77. This designation defines the LS2 as being ethanol fuel compatible. Various engines with names such as LY5, LH6, and LMF were produced and seen in SUVs such as the Chevrolet Trailblazer and GMC Savana. LS7 was a rarely seen engine in Australia. It was intended to be produced for a specific HSV car here called the W427. Corsa Special Vehicles beat HSV to the punch here, with their engine producing 400kW and 600Nm. HSV’s version, first shown at the 2008 Melbourne International Motor Show, offered 375kW and 640Nm. A supercharged and slightly capacity increased engine, at 6.2L and called LSA, was released in 2009. This was first seen in the ballsy Cadillac CTS-V and Australia had it in the GTS, GTS-R, and Maloo R8 LSA, just to name a couple. 480kW was the peak power and an amazing 754Nm of torque. These came courtesy of a block with revised compression, cast pistons, and a “blower’ of 1.9L in capacity. With Holden ceasing local manufacturing in late 2017, the LS engines are now only to be found in cars already on Australian roads or in vehicles allowed to be imported from the US to Australia. For now….anyway. Stand by for Camaro. Keep in touch with Rare Spares and updates on our product range via our main website and for news and tips via the blog.