Rare Spares Holden Torana GTR-X Concept Car

Holden has a very strong history when it comes to designing and engineering concept cars. Of recent years there’s the immaculate Efijy, and the reborn Monaro. Both two door cars, interestingly enough, as two other concept cars were also two doors. There’s the Hurricane, and the Torana GTR-X.

The latter came oh so close to being put into production, and the chassis itself was based on the LC Torana XU-1. The low slung, fibreglass bodied, slinky looking, machine even had the same engine, the then potent 186S.

Exterior design was eye catching, with a long bonnet that started with a flat, shovel-like nose, pop up headlights, a steeply raked windscreen, and a sharp tail with hockey stick tail lights. These were design elements that were later seen in two of Italy’s best from Ferrari and Maserati.

Inside the cabin featured laid back bucket seats, milled aluminuim sheeting, a plethora of gauges for oil temp and pressure and the like, and a short throw gear selector for the four speed manual.

That was connected to the straight six which produced 119kW and 265Nm. They’re hardly groundbreaking numbers now but for a car built in 1970 that weighed under 1050kg, they provided more than enough punch. Unique at the time were the disc brakes to be found at each corner.

It’s unclear exactly how many versions were built; some say three, some say four, but it’s known that just one example of what could have been an inspirational car survives. Holden has a museum at its Melbourne based headquarters, where the sole survivor lives in cosseted luxury.

Why wasn’t it ever sold? The population of Australia in 1970 was just over twelve million and Holden’s numbers indicated that wasn’t enough to justify what would potentially be a low volume seller. Considering how well received the Datsun 240Z was when it was released just a year before, and how it’s perceived still after nearly fifty years, one could say this was a somewhat shortsighted view.

Have you seen the Holden Torana GTR-X? What do you think of the car? Head over to the Rare Spares Facebook page and let us know in the comments section below.

David Ryan’s FX Holden Build

In this week’s Rare Spares Blog we will be taking a look at a project car close to the heart of Rare Spares Director David Ryan. It would be fair to say that David has an affinity with old Holdens, more specifically 1950’s FX’s and FJ’s, having owned numerous of the early Aussie classics and having raced them across the country and overseas!

David has recently been able to purchase back one of his old Variety Club Bash cars, and has an ambitious plan laid out for it to be completely restored by Christmas 2018 for a special occasion – his granddaughter Chloe’s wedding! The 1953 FX in question has had anything but an easy life, let’s take a look!

In 1953, David’s father, uncle and a mate decided to take part in the REDeX  Around Australia Reliability Trial using a black 1953 FX Holden taken from the fleet of the family taxi service and used for the event.

Upon its return it was reinstated to the rank to serve out its days once again as a cab.


 

In 1986, David, and some mates decided to take part in the famed Variety Club Bash event using an EH Holden setup specifically for offroad racing. Officials deemed the car was too fast and not suitable for this sort of event, hence a more suitable replica of the original FX was decided to be built for their next foray into the Bash the following year.

The work undertaken to build the replica FX was completed by David and his mates utilising the converted bus depot that was at that stage the premises of the fledgling Rare Spares organization.  David’s father was kept in the dark on the build until the time of unveiling, when one day he drew back the garage doors to unveil the pristine replica of his beloved REDEx machine.


 

 

In 1990, the FX was sold and David was left to focus on his many other ongoing projects. These included competing in the 1993 London to Sydney Marathon in a HK Monaro, taking an Aussie 1946 Chev ute street rod to the US and a trip to Mexico to compete in the 2013 La Carrera Panamericana, a 3200km open road event, racing a 1954 FJ! You can read about this incredible restoration and event here

Over the past decade David was in regular if not frequent contact with the owner asking if the FX would ever be available to buy back. The once loved car was languishing in a suburban backyard, dying a slow and rusty death, with the new owner unwilling at that time to part with it..

Fast forward to early 2018, David was searching through some online early Holden forums where low and behold, his FX was listed as possibly coming up for sale! A quick phone call was made to the owner to re-express his interest.

 

 

After a week or two of negotiating back and forth, the car is now back in David’s hands and plans are well underway for a complete restoration to be finished by December for Chloe’s wedding. With an abundance of options for her wedding car, one would think Chloe would go for something a little more luxurious. However, with the FX once again back in the hands of her grandfather, there was only one car Chloe had in mind!

The car is now in Adelaide where it is being paint stripped and rust treated, this is due to be completed by mid next week. From there extensive rust repair will be undertaken before being baked, primed and painted by a good friend. The seats will be re-trimmed in their original colour (red) all while a full mechanical refurbishment will be undertaken. The 132ci grey motor, 3 speed transmission, differential and suspension will all be rebuilt to stock specifications.

We will be paying close attention to the FX Holden build, so stay tuned for further updates as 2018 progresses!

What are your memories of the early 1950s Holden’s? Did you or someone you know own one? Head over to the Rare Spares Facebook page and let us know about it in the comment section below!

History of the Sandman

The Holden Sandman, a car that represented a generation of Australians and likely one of Holden’s most iconic cars has undergone a number of reincarnations throughout its lifetime. While the true Sandman will always remain the 1970’s surf and lifestyle icon for most, the Sandman name has been used on a number of cars throughout the four decades between then and now. In this week’s blog we’ll recap the different looks the Sandman has undertaken throughout the years.

The Original Sandman (HQ, HJ, HX, HZ)

A combination of the ever increasing costs associated with owning a sports car combined with the increasing liberation and freedom of the youth of Australia led to a boom in the popularity in panel vans before the Sandman was even announced. Not one to miss a sales opportunity, Holden brought out the Sandman, a panel van by nature, with the added performance and luxury initially of the Belmont and eventually the Kingswood. Optional extras included the 253ci V8, a mattress, and sunroof while softer suspension and a drop-down split tail gate for ease of access differentiated the Sandman from the regular panel van. Understandably the Sandman was a huge hit among young Males who now had a car that could do everything – you could sleep in it, transport surfboards and ‘woo’ mates and lady friends alike; the Sandman was sexy.

The Concept

In 2000, Holden teamed up with surf wear brand Mambo to create a modern day Sandman concept. Based on the VU ute, the Sandman concept was received very well amongst the general public, with many calling to introduce it into production. Featuring a ‘burnin’ love’ interior, ‘bushfire orange’ exterior and the Sandman logo gracing the tailgate - the concept was true blue Aussie. Gracing the side panels were murals designed by Mambo’s head art director, featuring bush and beach goddess’. In reaction to the favourable reception from punters, the Sandman styled canopy was included as a $6,150 option to regular Utes in 2003, although was discontinued in 2006 when interest decreased, not to mention the incredibly complex nature of installation.

The Race Car

Supercar team Red Bull Holden Racing set about creating a tribute to the original Sandman in 2014 when they created their new ride car. In what looks like a VF ute from the side, and a VF Wagon from the rear, the Red Bull Sandman was met with mixed reception, although is none-the-less, an impressive vehicle. The car was originally built with a 700HP V8 and featured new-to-the-sport technology such as paddle shifting and a fly-by-wire throttle. This year, however, the Sandman has been used as a test dummy for the incoming twin-turbo V6 that will grace the sport come 2019. The car was used to unveil the new engine to the public in October 2017 with demonstration laps at the Bathurst 1000.

The 40 year anniversary ‘reincarnation’

In 2015, Holden decided it was time to reincarnate the Sandman in the form of a limited edition Sportwagon and Ute. Although without a true panel van option, purists were left disappointed in what were essentially SV6 or SS-V Commodores with added logos, pinstripes and a ‘retro’ coloured interior. Given the small production run of only 250 across all options, the 2015 Sandman may very well end up a collectable in the future, particularly as Holden manufacturing in Australia has ceased. Time will tell…

What are your thoughts on the various Holden Sandman’s throughout the years? Head over to the Rare Spares Facebook page and let us know in the comments section below.

The Final Holden built on Australian Shores

The final Holden built on Australian shores has rolled off the Elizabeth production line. On October 20 at 10:45am, the final four Australian built Holden’s were ‘officially’ completed with a red VFII SSV Redline Commodore the final to leave the facility. The Commodore, on black wheels with a manual transmission was the 7,687,675th Holden built and will be kept and used as a museum piece. The other cars down the production line on October 20 were the final Holden ute (SS), wagon (Calais) and ‘limousine’ (Caprice).

With a 6.2 litre LS3 up front, the last SS will also go down as Holden’s fastest production model to date with 304kw and 570nm on offer (Not including HSV models). With accessories that include FE3 suspension, a sunroof and HUD, the final commodore is testament to the journey Australian built cars have come on over the last 7 decades. In terms of power, safety and usability the final Commodore (and Falcon for that matter) is hardly bettered in terms of ‘bang-for-buck’.

After 69 years of manufacturing, Holden ceased manufacturing operations in October, leaving hundreds unemployed and bringing an end to a huge part of Australia’s manufacturing history. Employees were taken by bus to the Adelaide Oval for final knock-off drinks and treated to a show by the legendary Jimmy Barnes. The Elizabeth plant, in Northern Adelaide has been sold to an unidentified owner who will turn the facility into a business park.

With this closure, we bid an official farewell to Australian automotive manufacturing and look back at the many classics produced on our shores. Stay tuned to the Rare Spares Blog where we will continue to take a look at the many classics produced on Australian shores.

Do you have any Holden stories you would like to share? Head over to the Rare Spares Facebook page and let us know in the comments below.